Luggage

A strong English made carrier, available in black or chrome. Easy to fit, no modifications needed.

Note: Suitable ONLY for the Electra (X) and Electra EFI with the scrambles seat (Part No'S.: 91432 or 93581) fitted.

Built to our own design, this strong, quality, English made carrier is easy to fit and comes powder coated in black.

Our own superior design, a quality, strong English made carrier. Easy to fit, available in black or chrome. (Please note 92541 will require a small amount of modification to fit with the 350 deep valanced mudguard).

Note 1: If you have the deep valanced rear mudguard: For black please order Part Number: 92541/350. For chrome please order Part Number: 92541C/350.
If you have the mudguard shown in the photograph: For black please order Part Number: 92541/500. For chrome please order Part Number: 92541C/500.

Note 2: We can also supply a single pillion seat (Part 91402) that mounts directly on to this carrier.

A stainless steel English made rack for when a single seat is fitted. Will require drilling of two 6mm holes in the rear mudguard. Supplied with fixings.

This lightweight lockable top box fits with the large rear carrier shown above. It is large enough to take a full face helmet and is supplied with a fixing kit which allows a quickly detachable removal. Finished in black/red.

(Maximum inside measurements: W=360mm, H=270mm, L = 330mm).

In conjunction with the world famous Givi we have developed various fixing kits which allow us to offer some quality affordable hard luggage options for the Bullet.

This lightweight lockable top box fits with the large rear carrier as shown elsewhere in this section. It is supplied with a fixing kit which remains bolted to the carrier while a single key is used for locking the lid as well as allowing the complete top box to be removed in seconds. Finished in black/red.

(Maximum inside measurements W=400mm, H=260mm, L = 550mm)

Also available for the top box above is a polyurethane backrest.

A set of left and right hand side panniers including framework, lightweight, lockable and watertight. The framework can remain bolted to your Bullet while a single key is used for locking the lid as well as allowing the complete top box to be removed in seconds. Finished in black. Stylish while remaining traditional. If required this will fit with the rear carrier and top box shown – purchased separately.

(Maximum measurements W=196mm, H=348mm, L = 425mm)

Note: If you have your Givi side panniers already we can supply just the fixing kit.

This tool "roll" is made from a thick hide. It is approximately 3" wide, 6" tall, 10" long and is held on by 2 straps. It can be fitted to the rear grab rail or mudguard carriers (it should not be fitted to the front forks as it will restrict their movement). Available in black, embossed with "Royal Enfield" in gold and it can be fitted on any model (tools not included).

This tool roll is made from a thick hide. It is approximately 4.5" diameter by 10" long and is held on by 2 straps. It is designed to strap on to the fork legs, but can be fixed anywhere. Available in black or brown, embossed with "Royal Enfield" in gold and it can be fitted on any model (tools not included).

Note: It will only fit the Classic EFI model if the small rack 92740 is fitted.

An anti-slip webbed mat which not only increases the grip between luggage and bike, but protects the paint or chrome from being scratched. It measures 60cm x 90cm and can be trimmed with scissors to the required shape and size.

This is great value. It has a clear pouch in the top for maps etc. It has a zip up extension to allow extra room should you need it. These bags are black nylon with the gold "Royal Enfield" on each side. The magnetic flaps are soft to prevent damage to your tank. It also comes with a shoulder strap and handle, so can be carried easily. Fits in seconds!

A strong genuine hide pannier bag. It has 3 substantial leather buckles at the rear to strap it to your Bullet. It comes in black or brown, either with or without the gold "Royal Enfield" logo. Sold individually.

Maximum Inside Measurements: W=110mm, H=300mm, L=320mm.

Note: For Electra (X) and Electra EFI models you will also require the bolt-on frameworks Part 93040 shown elsewhere in this section.

A heavy weight genuine hide pannier bag with substantial straps for attaching to your Bullet. Available in black or brown with "Royal Enfield" embossed on the flap. Sold individually.

Maximum Inside Measurements: W=95mm, H=270mm, L=280mm

Note: For Electra (X) and Electra EFI models you will also require the bolt-on frameworks Part 93040 shown elsewhere in this section.

Bolt-on frames required when using throw-over luggage and some types of panniers on an Electra (X) and Electra EFI.
Sold as a pair.

These large capacity heavy duty pannier bags are made from a high quality hide. The bags are available in. They are detachable and come complete with their own metal framework. Sold as complete set.

Maximum Inside measurements: W=185mm, H=330mm, L=380mm.

Note: Although both types of bags are of a very good quality we would recommend repainting of the framework.

These are good quality, hand crafted black leather bags. They are embossed with "Royal Enfield". The bags are easily detachable and supplied with replacement black mudguard carriers and fixings.

Each bag is a different size.
Maximum Inside Measurements:
Bag 1: W=105mm, H=400mm, L=300mm.
Bag 2: W=105mm, H=300mm, L=305mm.

Note: Due to the poor quality of the paintwork we would recommend repainting it.

These carriers are a virtual copy of the original Redditch made items from the 50’s. Made in England and finished in black. We supply the pair of pannier frames, with a complete set of fixings, as a kit. Heavy duty canvas and good quality thick leather bags are available separately (see below for details) in case you want to fit a different type of bag.
(Maximum bag size to fit frame W=130mm, L = 355mm).

Heavy duty canvas and good quality thick leather bags designed to be used with the pannier frames shown above. Sold each.
(Maximum inside measurements: W=120mm, H=350mm, L = 350mm).

These are the Enfield army style panniers. They comprise of 2 steel boxes, 1 pair of metal frame works and all fixings. Painted finish.

Maximum Inside Measurements: W=120mm, H=340mm, L=375mm.

Note: The colour of the component parts may vary (black or green) but due to the poor quality of the paintwork we would recommend repainting.

Important Note: In the box below please state whether the bike they are to be fitted to is a 350cc or 500cc. Also if it is a 500cc does it have the original shallow mudguard or a deeper valanced one.

These are Indian made panniers which are finished in black plastic and come complete with locks and painted black framework. Due to variances in manufacture, a little persuasion during fitting may be required but they offer very good value for money.

Maximum Inside Measurements: W=127mm, H=330mm, L = 500mm.

These are made from a good quality hide and the studded appearance creates a personal look. They are supplied complete with framework and fixings.

(Maximum inside measurements W=120mm, H=280mm, L = 480mm).

**Price reduced from £220.00 to clear**

Note: These can be made to fit the Electra and Electra EFI models, but will require the drilling of an extra hole on each side of the standard dual seat or alternatively a small bracket could be made.

A throw-over style bag which fits over the rear mudguard or seat. They are well made from thick black hide and are embossed with "Royal Enfield".

Maximum inside me asurements:
W=140mm, H=340mm, L=320mm

Note: If fitting on an Electra (x) or Electra EFI you will also require the bolt-on frameworks Part 93040.

These are a heavy duty throw-over bag. They have numerous pockets and straps, are coated in rubberized PVC and have a nylon inner lining which makes them very weather proof. Due to their shape it is difficult to give accurate dimesions but they expand to a maximum inside measurement of: W=200mm, Max H=300mm, L=360mm.

Note: If fitting on an Electra or Electra EFI you will also require the bolt-on frameworks Part 93040.

Nylon throw-over bags. A quick and simple answer to luggage problems with waterproof inners.
Due to their shape, these are difficult to measure but expand to a maximum inside measurement of: W=200mm, H=260mm, L=400mm.

Note 1: If fitting on an Electra (X) or Electra EFI you will also require the bolt-on frameworks Part 93040.

Note 2: Designed to carry maximum of 5kg per bag.