Road Scrambler

By clicking on the picture you can see another of our creations made using accessories from our online catalogue. We started with a totally standard 500 Bullet and used our imagination. We would be happy if you copied this, but it is just an example of what can be done. You can create your own version and change as little or as much as you wish. Below are listed all the parts we have used.

This pillion pad is a typical accessory of the 1940's and 1950's. It will require drilling of the rear mudguard to allow the fixing of the 4 supplied attachment bolts. A choice of English or Indian made.

Note: NOT suitable for the Electra(X), Thunderbird or Electra EFI models.

Our own superior design, a quality, strong English made carrier. Easy to fit, available in black or chrome.

Note: NOT suitable for Redditch Bullets or the Thunderbird.

This seat is about 2/3 the length of the standard dual seat and gives a nice sporty look. It is complete with all fixing brackets and will bolt straight on. This looks equally as good on the standard Bullet, Electra, EFI models or OUR trials Bullets.

Note: NOT suitable for Redditch Bullets or Thunderbird.

Braced handlebars suitable for use with standard length cables. English made and chromed.

This is the tank that was originally fitted to the competition Enfields of the late 50's and 60's. It holds approximately 2.5 gallons. Supplied either chromed or unpainted. We can also supply a fixing kit which includes the fixing brackets, cap,chrome panels, badges, transfer etc.

Note 1: Knee rubbers (Part No.: 41207 - not shown) can be fitted as an optional optional extra.

Note 2: Suitable for all Indian Bullets. N0T suitable for Thunderbird or EFI models.

This mirror is made to fit the Minda levers which have a left and a right hand thread. They have a shorter stem than the originals and are finished in chrome, so are very appealing. Supplied as a pair.

They can be fitted to the Magura levers with a special pair of adaptors sold separately. Order Part No.: 92571.

This chrome front mudguard is supplied with the set of 6 stays and fixings.

GAITERS - Not only enhance the look of your Bullet, but also give added protection to the main tubes and seals. These are a tight fit on to the forks and require no additional fixings.
Note 1: Sold individually.
Note 2: Suitable for all Redditch and Indian built Bullets.

FORK COVER TUBES (SHORT) - If you are fitting the gaiters or want exposed fork main tubes, then these cover tubes are just what you need. They fill the gap between the casquette and the bottom yoke.
Note 1: Sold Individually.
Note 2: NOT suitable for Redditch built Bullets.

OPTION 1 - This conversion includes all the parts needed to convert the standard drum brake. You will need to reuse the wheel rim, bearings etc from your existing bike. You will need to modify the brake anchor lug on the alloy fork end and centre mudguard stay.

OPTION 2 - It includes all the parts in Option 1 but with the addition of a new rebuilt wheel. This will allow a simple bolt on option with only the brake anchor lug and mudguard stay to modify.

These tyres retain the authentic appearance of the 1960's period but use modern materials and manufacturing technology to achieve modern levels of tyre performance and durability. These sizes fit straight on to the standard Bullet rims.

This is the early style air filter assembly and allows you to remove the original filter that is fitted in the right hand toolbox on late models, thus freeing up this toolbox for other purposes (it is not possible to modify your existing rectangular box due to the different way in which it draws air). This assembly comes complete with element and transfer and is available either chromed (as shown) or powder coated in black.

Both these products are Indian made.

This English made system is a copy of the 1960's upswept exhaust fitted to the Royal Enfields. The kit consists of the exhaust pipe, silencer and heavy-duty silencer clip. It will give enhanced performance along with a fairly noisy 1960's sound.

An Indian made and chromed chainguard suitable for all Indian made Bullets EXCEPT EFI models.

Note: NOT suitable for Redditch built Bullets.

These small indicators are finished in chrome and are mounted via a fixed chrome stem. Excellent value. Sold in pairs. 12 volts

This is the standard part fitted to the Thunderbird models and looks great as a custom part. Comprises of the number plate holder and rear light. It can easily be adapted to fit any model (indicators are not included).

An Indian made chrome plated rear mudguard.

A stainless steel peak which fits the standard Bullet headlight.