Engine Tools
1/2" - 3/8" DRIVE ADAPTOR
Click to enlarge
A chrome vanadium adaptor which reduces a 1/2" drive ratchet to 3/8".
| PART No. | DESCRIPTION | PRICE | |
| 98314 | SOCKET ADAPTOR (1/2'' ratchet - 3/8'' socket) | £2.90 |
ADJUSTABLE SPANNER SET
Click to enlarge
A set of 3 adjustable spanners in 150mm, 200mm and 250mm lengths, which will open to 20mm, 25mm and 30mm respectively.
| PART No. | DESCRIPTION | PRICE | |
| 98313 | ADJUSTABLE SPANNER SET (3) | £17.50 |
AUTO ADVANCE EXTRACTOR
Click to enlarge
This is a simple tool, suitable for the Indian built Bullets only, for extracting the auto advance unit in the distributor.
Note: NOt suitable for Redditch Bullets, Electra (X), Thunderbird, EFI models.
| PART No. | DESCRIPTION | PRICE | |
| 49622 | CONTACT BREAKER EXTRACTOR, SII & EI | £5.00 |
DIAL GAUGE WITH ADAPTOR
Click to enlarge
This dial gauge will enable you to accurately find top dead centre. It is not only supplied with an adaptor specifically designed for the Bullets but also 2 extra plunger lengths which allow it to fit numerous British bikes that use a standard 14mm spark plug.
Note: Not suitable for EFI models.
| PART No. | DESCRIPTION | PRICE | |
| 98364 | DIAL GAUGE 0-10mm WITH ADAPTOR | £28.50 |
AUTO ADAVANCE LOCKING TOOL
Click to enlarge
Suitable for the Indian made Bullets this tool fits under the lock screw on the distributor advance mechanism to lock the bob weights in the fully advanced position whilst setting the ignition timing.
Note: NOT suitable for Redditch Bullets, Electra (X), Thunderbird, or EFI models.
| PART No. | DESCRIPTION | PRICE | |
| 49717 | AUTO ADVANCE LOCK WASHER TOOL | £1.50 |
VALVE GUIDE REMOVAL AND FITTING TOOL
Click to enlarge
This makes the fitting and removal of valve guides a simple and easy job.
Note: Suitable for all Redditch and Indian Bullets. NOT suitable for Electra (X), Thunderbird, or EFI models.
| PART No. | DESCRIPTION | PRICE | |
| E0008 | VALVE GUIDE REMOVE/FIT TOOL | £19.50 |
GEARBOX NUT BOX SPANNER
Click to enlarge
A box spanner suitable for the gearbox sprocket nut on the 4-speed (98315) and 5-speed (98317)models.
Note: NOT suitable for Redditch built models.
| PART No. | DESCRIPTION | PRICE | |
| 98315 | BOX SPANNER for 4 speed sprocket nuts | £16.00 | |
| 98317 | BOX SPANNER for 5 speed sprocket nuts | £19.75 |
OIL PUMP LAPPING TOOL
Click to enlarge
This lapping tool has been specially designed and manufactured by us to work with both the Feed and Return oil pumps.
Note: Suitable for 350cc (56-62) & 500cc Redditch Bullets and all Indian Bullets. NOT suitable for Electra (X), Thunderbird or EFI models.
| PART No. | DESCRIPTION | PRICE | |
| 98168 | OIL PUMP LAPPING TOOL (FEED & RETURN) | £14.00 |
CAM SPINDLE EXTRACTOR
Click to enlarge
Suitable for Electra models.
| PART No. | DESCRIPTION | PRICE | |
| ST25115 | CAM SPINDLE EXTRACTOR (ELECTRA ONLY) | £20.00 |
CHAINCASE OUTER PULLER
Click to enlarge
Suitable for Electra models ONLY.
| PART No. | DESCRIPTION | PRICE | |
| ST25151 | CHAINCASE OUTER PULLER | £9.00 |
CYLINDER HEAD NUT TOOL
Click to enlarge
Suitable for Electra models ONLY.
| PART No. | DESCRIPTION | PRICE | |
| ST25118 | CYLINDER HEAD NUT SPANNER | Currently unavailable |
DISTRIBUTOR PINION EXTRACTOR
Click to enlarge
The name says it all. A tool for the Bullet used for removing the Distributor gear.
Suitable for Classic models ONLY.
| PART No. | DESCRIPTION | PRICE | |
| 98167 | DISTRIBUTOR PINION EXTRACTOR | £18.50 |
DRIP TRAY
Click to enlarge
This steel tray is embossed with the Royal Enfield name. Can be used for an oil change or just a simple drip tray. Its maximum internal dimensions are 350mm x 280mm x 40mm high.
| PART No. | DESCRIPTION | PRICE | |
| 90155 | DRIP TRAY, 350mm x 280mm x 40mm(MAX INT), with ''ROYAL ENFIELD'' | £8.00 |
GEARBOX PIVOT PIN EXTRACTOR
Click to enlarge
Suitable for Electra models ONLY.
| PART No. | DESCRIPTION | PRICE | |
| ST25153 | 5 SPEED GEARBOX ROCKER EXTRACTOR | £4.00 |
GEARBOX PIVOT PIN GUIDE
Click to enlarge
Suitable for Electra models ONLY.
| PART No. | DESCRIPTION | PRICE | |
| ST25156 | 5 SPEED GEARBOX GUIDE MANDREL | £5.50 |
IDLER SPINDLE EXTRACTOR
Click to enlarge
Another tool for Bullets. Designed to aid in removing the idler spindle.
Suitable for Classic models ONLY.
| PART No. | DESCRIPTION | PRICE | |
| 98166 | IDLER SPINDLE EXTRACTOR | £14.00 |
IGNITION FILE
Click to enlarge
This file is ideal for dressing the ignition points. It also has 2 feeler guages fitted: 0.381mm (0.015") and 0.625mm (0.025").
NOT suitable for Electra models.
| PART No. | DESCRIPTION | PRICE | |
| 98325 | IGNITION FILE | £3.50 |
LASER SOCKETS AND RAIL (WHITWORTH, 1/2" DRIVE)
Click to enlarge
This is a set of 9 (1/2" drive) whitworth sockets in the following sizes 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16 and 5/8w.
| PART No. | DESCRIPTION | PRICE | |
| E4000 | SOCKET RAIL, WHITWORTH, 9 SOCKETS 1/2'' DRIVE | £19.00 |
MAGNETO EXTRACTOR
Click to enlarge
Suitable for Electra models + EFI models ONLY.
| PART No. | DESCRIPTION | PRICE | |
| ST25128 | MAGNETO PULLER Electra X + EFI models (For Electra X can also use part number 98035) | £28.50 | |
| 98035 | MAGNETO PULLER (Electra X only) | £20.00 |
POINTS SPANNER SET
Click to enlarge
Small spanner set for magnetos and distributors etc.
| PART No. | DESCRIPTION | PRICE | |
| 98007 | SPANNER SET FOR MAGNETO | Currently unavailable |
ROCKER SPINDLE EXTRACTOR
Click to enlarge
Suitable for Electra models ONLY.
| PART No. | DESCRIPTION | PRICE | |
| ST25117 | ROCKER SPINDLE EXTRACTOR | £5.00 |
SPARK PLUG HOLE RE-THREADER
Click to enlarge
Ideal for cleaning and restoring a carbon filled or damaged spark plug thread in your cylinder head.
Suitable for BOTH the Classic and Electra models.
| PART No. | DESCRIPTION | PRICE | |
| 98327 | SPARK PLUG THREAD CHASER | £7.50 |
SPARK PLUG THREAD REPAIR KIT
Click to enlarge
| PART No. | DESCRIPTION | PRICE | |
| 98355 | SPARKPLUG HELICOIL REPAIR KIT | £57.75 |
TAPPET CIRCLIP ASSEMBLY TOOL
Click to enlarge
Suitable for Electra models ONLY.
| PART No. | DESCRIPTION | PRICE | |
| ST25116 | TAPPET CIRCLIP TOOL | £17.50 |
TOP DEAD CENTRE TOOL
Click to enlarge
This tool is the easy way to find top dead centre. Simply screw it in the spark plug hole.
| PART No. | DESCRIPTION | PRICE | |
| E0003 | TOP DEAD CENTRE TOOL | £7.50 |
CAM SPINDLE PULLER
Click to enlarge
This tool allows the removal of the cam shaft spindles without splitting the crankcases.
Suitable for Classic models ONLY.
| PART No. | DESCRIPTION | PRICE | |
| 98002 | CAM SPINDLE PULLER | £20.00 |
FEELER GAUGE
Click to enlarge
Available in imperial and metric sizes.
| PART No. | DESCRIPTION | PRICE | |
| 98005 | FEELER GAUGE, IMPERIAL, 8 BLADE | £3.50 | |
| 98004 | FEELER GAUGE, METRIC | £3.50 |
VALVE LAPPING TOOL
Click to enlarge
For lapping the valves to the seats once new guides have been fitted.
| PART No. | DESCRIPTION | PRICE | |
| E0006 | VALVE LAPPING TOOL | £2.00 |
TIMING DISC
Click to enlarge
To help set-up your ignition timing in degrees.
| PART No. | DESCRIPTION | PRICE | |
| E0004 | TIMING DISC | £3.30 |
SPARK PLUG SPANNER
Click to enlarge
For use with any standard 14mm spark plug.
| PART No. | DESCRIPTION | PRICE | |
| E0005 | SPARK PLUG SPANNER 14mm | £4.50 |
RECOIL THREAD REPAIR KITS
Click to enlarge
The simple way to repair damaged threads or create stronger threads in alloy components. Recoils are made from stainless steel diamond shape wire to match the profile of internal thread and external screw thread. The insert is larger in diameter than the tapped hole and compresses during installation and springs back permanently anchored in the tapped hole.
Each kit contains: Quality high speed steel (HSS) ground thread intermediate tap, quantity of inserts, installation/tang break tool, easy to follow instructions and a sturdy reusable container. Recommended drill size is given on the label.
Extra inserts available in most sizes, please enquire.
Note: We can now also supply 2 "kits" which contain a selection of the most commonly used Cycle and Metric sizes.
| PART No. | DESCRIPTION | PRICE | |
| 98040 | RECOIL KIT, 14mm for SPARK PLUG, requires 14.5mm drill | £73.00 | |
| 98052 | RECOIL KIT, 10mm METRIC | £31.00 | |
| 98051 | RECOIL KIT, 8mm METRIC | £26.00 | |
| 98050 | RECOIL KIT, 6mm METRIC | £25.00 | |
| 98031 | RECOIL KIT, 5/16 WHITWORTH | £29.00 | |
| 98030 | RECOIL KIT, 1/4 WHITWORTH | £26.00 | |
| 98022 | RECOIL KIT, 7/16 BSF | £31.00 | |
| 98021 | RECOIL KIT, 3/8 BSF | £29.00 | |
| 98020 | RECOIL KIT, 5/16 BSF | £27.00 | |
| 98010 | RECOIL KIT, 1/4 BSF | £26.00 | |
| 98013 | RECOIL KIT, 7/16 X 26 CYCLE | £55.00 | |
| 98012 | RECOIL KIT, 3/8 X 26 CYCLE | £52.00 | |
| 98011 | RECOIL KIT, 5/16 X 26 CYCLE | £40.00 | |
| 98019 | RECOIL KIT, 3/16'' BSF | £26.00 | |
| 98049 | RECOIL KIT, 5mm METRIC | £23.00 | |
| 98016 | RECOIL GROUP KIT BSCY, 1/4, 5/16, 3/8, 7/16, 1/2'' | £199.00 | |
| 98056 | RECOIL GROUP KIT METRIC, 5mm, 6mm, 8mm | £70.00 |
TAPPET GUIDE EXTRACTOR
Click to enlarge
ST25119 - Suitable for Leanburn models ONLY.
ST25109 - Suitable for Classic models ONLY.
| PART No. | DESCRIPTION | PRICE | |
| ST25109 | TAPPET GUIDE EXTRACTOR (2040), classic | £26.00 | |
| ST25119 | TAPPET GUIDE EXTRACTOR (leanburn) | £26.00 |
CLUTCH CENTRE EXTRACTOR
Click to enlarge
Suitable for BOTH the Classic and Electra models.
| PART No. | DESCRIPTION | PRICE | |
| ST25099 | CLUTCH EXTRACTOR (Bolts not included) | £16.50 |
CLUTCH CENTRE HOLDING TOOL
Click to enlarge
Suitable for BOTH the Classic and Electra models.
| PART No. | DESCRIPTION | PRICE | |
| ST25104 | CLUTCH HOLDING TOOL (This may diifer to picture shown in catalogue) | £15.00 |
ENGINE SPROCKET EXTRACTOR
Click to enlarge
Suitable for BOTH the Classic and Electra models.
| PART No. | DESCRIPTION | PRICE | |
| ST25098 | ENGINE SPROCKET EXTRACTOR (2004) | £20.00 |
GUDGEON PIN EXTRACTOR
Click to enlarge
Suitable for Electra and Classic.
| PART No. | DESCRIPTION | PRICE | |
| ST25102 | GUDGEON PIN EXTRACTOR | £24.50 |
OIL PUMP WORM SPANNER
Click to enlarge
Please specify whether for CLASSIC or ELECTRA models.
| PART No. | DESCRIPTION | PRICE | |
| 98003 | OIL PUMP WORM SPANNER (can use ST25100) | £14.00 |
SLEEVE FOR FITTING MAINSHAFT OIL SEAL
Click to enlarge
Suitable for Classic models ONLY.
| PART No. | DESCRIPTION | PRICE | |
| ST25111 | TOOL FOR FITTING M/SHAFT OIL SEAL (2074) | £9.50 |
TIMING PINION EXTRACTOR
Click to enlarge
The best tool for removing that stubborn Bullet timing pinion from the crankshaft.
Suitable for Classic models ONLY.
| PART No. | DESCRIPTION | PRICE | |
| 98001 | TIMING GEAR PULLER | £18.00 |
VALVE SPRING EXTRACTOR
Click to enlarge
Suitable for BOTH the Classic and Electra models.
| PART No. | DESCRIPTION | PRICE | |
| ST25123 | VALVE SPRING COMPRESSOR (2018) | £24.00 |
IF YOU ARE NEW TO THIS SITE AND WOULD LIKE INSTRUCTIONS ON HOW TO USE AND NAVIGATE IT, PLEASE CLICK HERE.
