Castroil Oil Can Set
Genuine Castrol tin pouring cans featuring the Castrol logo. A set of 3 cans in half-pint, pint and Quart (2 pints) volumes. These are fully usable for their original purpose as well as being used as a desk tidy for pens etc or simply looking good in the garage. Whatever their use, they are a great bit of motoring nostalgia.
|98379||OIL CAN, SET OF 3, CASTROL||£24.80|
SAFETY WIRE KIT (TOOL + WIRE)
|98318A||SAFETY WIRE (30Meters x 0.8mm thick)||£5.50|
|98318||SAFETY WIRE KIT (TOOL + WIRE)||£9.90|
SPARK PLUG GAP GAUGE
|98365||SPARK PLUG GAUGE (COIN TYPE)||£5.00|
REAR SHOCK ABSORBER SPRING COMPRESSOR (FOR OPEN SPRINGS)
|98036||REAR SUSPENSION COIL SPRING COMPRESSOR KIT (2 piece set - Use with open springs only)||£43.50|
CLEANING CLAW BRISTLE BRUSH
|98076||CLAW BRISTLE BRUSH||£5.50|
CLEANING BRISTLE AND FOAM BRUSH
|98075||BRISTLE AND FOAM BRUSH||£5.00|
SET OF 3 BRUSHES (98075+98076+98077)
|98078||CLEANING BRUSH SET OF 3||£12.10|
This digital multmeter is essential for electrical fault finding. It can perform the following tests: AC and DC volts, DC current, resistance, transistors, diodes and continuity.
This xenon timing light allows the dynamic ignition timing to be set with up to 60 degrees of advance. It has inductive pick up for ease of connection. Operates on all 12v ignition systems. The xenon bulb (replaceable) provides a brilliant blue/white light and has automotive reverse polarity and overload protection.
|98312||STROBELIGHT WITH ADVANCE DIAL||£72.60|
10 meter roll.
|INSTAPE||INSULATION TAPE BLACK, 10M ROLL||£1.00|
Small (Maximum diameter approx 1.5") Can be used for plugging carb or exhaust port.
|91026||EXHAUST PLUG, Small (Maximum diameter approx 1.5")||£3.90|
DIAL GAUGE WITH ADAPTOR
This gauge has a 10mm range so will be able to indicate top dead centre as well as the fully advanced measurement. It is not only supplied with an adaptor specifically designed for the Bullets but also 2 extra plunger lengths which makes it fit numerous British bikes with the standard 14mm spark plug.
|98364||DIAL GAUGE 0-10mm WITH ADAPTOR||£38.50|
1/2" - 3/8" DRIVE ADAPTOR
A chrome vanadium adaptor which reduces a 1/2" drive ratchet to 3/8".
|98314||SOCKET ADAPTOR (1/2'' ratchet - 3/8'' socket)||£3.20|
THREAD PITCH GAUGE
Avalilable for both Imperial and Metric threads.
|98360||THREAD GAUGE, IMPERIAL||£7.50|
|98361||THREAD GAUGE, METRIC||£7.50|
ALTERNATOR CLEARANCE GAUGE
This is a simple laminate device which can be wrapped around the alternator rotor before tightening the outer stator. Once the stator has been fitted it is easily removed. A far easier process than messing around with feelergauges.
|98240||ALTERNATOR CLEARANCE SETTING SHIM||£1.70|
CARBURETTOR CLEANING TOOL
A handy little tool for cleaning those difficult to access drillings in your Carburettor.
|98316||CARBURETTOR JET CLEANER AND FILE||£8.80|
No home mechanic should be without one of these useful tools. Measures using imperial or metric scales.
|98330||VERNIER CALIPER DIGITAL 0-150mm||£22.00|
TELESCOPIC MAGNETIC PICK UP TOOL
|98345||MAGNETIC PICK UP TOOL||£5.50|
|98346||INSPECTION MIRROR, TELESCOPIC||£5.50|
A quality black leather tool pouch embossed with "Royal Enfield". Ideal for the inside of your Bullet (or any other Enfield) tool box.
Tools not included.
|92494||TOOL WALLET, LEATHER WITH LOGO||£19.30|
This tool "roll" is made from a thick hide. It is approximately 3" wide, 6" tall, 10" long and is held on by 2 straps. It can be fitted to the rear grab rail or mudguard carriers (it can not be fitted to the front forks as it will restrict their movement). Available in black, embossed with "Royal Enfield" in gold and it can be fitted on any model (tools not included).
|92492||TOOL POUCH, BLACK LEATHER WITH LOGO||£46.20|
This tool roll is made from a thick hide. It is approximately 12cm diameter by 25cm long and is held on by 2 straps. It is designed to strap on to the fork legs (if suspension travel allows), but can be fixed behind the seat or any suitable place. Finished with the name Royal Enfield embossed in the leather (tools not included).
Note: It will only fit the Classic EFI model if the small rack 92740 is fitted.
|92490||TOOL ROLL, BLACK HEAVY DUTY LEATHER WITH EMBOSSED LOGO||£46.20|
|92490A||TOOL ROLL, BLACK HEAVY DUTY LEATHER (NO LOGO)||£46.20|
|92491||TOOL ROLL, BROWN HEAVY DUTY LEATHER WITH EMBOSSED LOGO||£46.20|
|92491A||TOOL ROLL, BROWN, HEAVY DUTY LEATHER (NO LOGO)||£46.20|
A white pen for painting the wording on the side of tyres.
|97076||TYRE PEN, WHITE||£3.90|
WIRE BRUSHES (SET OF 3)
|98340||WIRE BRUSH SET (3 PIECE)||£7.20|
We can offer 2 styles of tiedown straps, either the standard ratchet strap type or the pull down and auto-lock version.
|98160||TIE DOWN STRAPS (PAIR) AUTOLOCK||£10.20|
|98162||TIE DOWN STRAPS (PAIR) RATCHET TYPE||£13.20|
BRAKE BLEEDING ASSISTOR KIT
This kit utilises a compact unit with one-way valve and connector hoses that simply attach onto the bleed nipple. Suitable for all disc brakes.
|98343||BRAKE BLEEDING ASSISTOR KIT WITH ONE WAY VALVE||£15.20|
The world renowned carburettor mixture setting device. Ideal fo motorcycles to help setup the correct air/fuel mixture for optimal running.
|98310||COLORTUNE, GUNSONS, 14mm||£35.00|
A compression tester suitable for all Royal Enfields.
A 10 piece stud extractor and HSS drill set. Spiral pattern extractors with square drive ends manufactured from quality steel. Packed in metal case with drills.
|98344||SCREW EXTRACTOR AND HSS DRILL SET (10 pieces)||£31.40|
Laser provide a range of quality tools suitable for the professional or home mechanic at an affordable price.
LASER COMBINATION SPANNER SET (METRIC)
This is a set of 6 ring/open ended metric spanners in the following sizes: 8, 10, 12, 13, 14, 17mm.
|98303||SPANNER SET, LASER, 6 PIECE COMBINATION, METRIC||£12.10|
LASER SPANNER SET (WHITWORTH)
This is a set of 6 open ended whitworth spanners in the following sizes: 1/8 x 3/16, 3/16 x 1/4, 1/4 x 5/16, 5/16 x 3/8, 3/8 x 7/16, 7/16 x 1/2.
|98096||SPANNER SET, WHITWORTH, 6 PIECE OPEN ENDED||£25.30|
COMBINATION SPANNER SET (WHITWORTH)
This is a set of 8 ring/open ended whitworth spanners in the following sizes: 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2 and 9/16w.
|98098||WHITWORTH COMBINATION SPANNER SET, 8 PIECE||£27.50|
LASER GASKET SCRAPER
The correct tool for scraping old gaskets off cylinder heads and crankcases etc. The wide steel blade helps prevent damage.
LASER HEX KEY SET
A set of 10 hex Allen keys available in both metric and imperial sizes.
|98306||ALLEN KEY SET, LASER, 10 PIECES IMPERIAL||£4.40|
|98307||ALLEN KEY SET, LASER, 10 PIECES METRIC||£4.40|
LASER HSS DRILL BIT SET (METRIC)
A set of 19 metric High Speed Steel drill bits ranging in size from 1mm to 10mm in 0.5mm increments.
|98308||DRILL BIT SET *discontinued*||Currently unavailable|
LASER RING SPANNER SET (METRIC )
This is a set of 8 metric ring spanners in the following sizes: 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19 and 20 x 22mm.
|98302||SPANNER SET, LASER, 8 PIECE RING, METRIC||£29.70|
LASER SCREW DRIVER SET
A 7 piece screwdriver set including: flat, Phillips and Pozidrive heads in a variety of sizes. They have soft grip handles and chrome vanadium shatfts.
|98301||SCREWDRIVER SET, LASER, 7 PIECE - TO CLEAR - SPECIAL PRICE.||£16.50|
LASER SOCKET SET RATCHET (3/8" DRIVE)
This is a chrome vanadium 3/8" drive ratchet with quick release mechanism.
|98305||RATCHET, LASER, 3/8'' DRIVE||£19.80|
LASER SOCKETS AND RAIL (METRIC, 3/8
Part Number: 98304 - A set of 9 (3/8" drive) metric sockets in the following sizes: 9, 10, 11, 12, 13, 14, 15, 17, 19mm.
Part Number: 98322 - A set of 17 (3/8" drive) metric sockets in the following sizes: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24mm.
|98304||SOCKETS, LASER, SET OF 8 METRIC||£14.60|
|98322||SOCKETS, LASER, SET OF 17 METRIC||£20.90|
LASER SOCKETS AND RAIL (WHITWORTH, 3/8" DRIVE)
This is a set of 7 (3/8" drive) whitworth sockets in the following sizes: 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2w.
|E4001||SOCKET RAIL, WHITWORTH, 7 SOCKETS 3/8'' DRIVE||£15.00|
LASER SOCKETS AND RAIL (WHITWORTH, 1/2" DRIVE)
This is a set of 9 (1/2" drive) whitworth sockets in the following sizes 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16 and 5/8w.
|E4000||SOCKET RAIL, WHITWORTH, 9 SOCKETS 1/2'' DRIVE||£23.00|
Britool are one of the UK's most respected tool manufacturers. We only stock a small selection, but they are of exceptional quality and considered by some to be the best available. The price reflects this, but you should never need to buy a replacement.
BRITOOL COMBINATION SPANNER SET (METRIC)
This is a set of 7 ring/open ended metric spanners in the following sizes: 8, 10, 12, 13, 14, 17 and 19mm.
|98205||SPANNER SET, BRITOOL, 7 PIECE COMBINATION, METRIC||£56.90|
BRITOOL HEX KEY SETS
A set of 9 hex Allen keys available in both metric and imperial sizes.
|98230||ALLEN KEY SET, BRITOOL, 9 PIECES, METRIC||£11.50|
BRITOOL OPEN JAW SPANNER SET (METRIC)
This is a set of 7 open ended metric spanners in the following sizes: 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19mm.
|98206||SPANNER SET, BRITOOL, 7 PIECE OPEN ENDED, METRIC||£46.00|
BRITOOL OPEN JAW SPANNER SET (WHITWORTH)
This Whitworth open spanner set has 7 pieces with the following sizes. 1/8 x 3/16, 3/16 x 1/4, 1/4 x 5/16, 5/16 x 3/8, 3/8 x 7/16, 7/16 x 1/2, 1/2 x 9/16w.
|98120||SPANNER SET, BRITOOL, 7 PIECE OPEN ENDED, WHITWORTH||£89.60|
BRITOOL RING SPANNER SET (METRIC)
This is a set of 7 metric ring spanners in the following sizes: 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19mm.
|98207||SPANNER SET, BRITOOL, 7 PIECE RING METRIC||£61.80|
BRITOOL SOCKET SET (METRIC)
This is a 7 (3/8" drive) piece bi-hexagon metric socket set on a rail. Sizes include: 10, 11, 12, 13, 14, 17, and 19mm.
Note: The Whitworth version of this set is no longer available.
|98200||SOCKETS, BRITOOL SET OF 7 METRIC||£41.20|
BRITOOL SOCKET SET RATCHET (3/8" DRIVE)
This is a 3/8" drive ratchet with a polypropylene handle. It uses a high quality 72 tooth twin pawl ratchet mechanism.
|98201||RATCHET, BRITOOL, 3/8'' DRIVE||£46.00|
BRITOOL TORQUE WRENCH (3/8" DRIVE)
This torque wrench has a 3/8" drive and with its low torque values is ideal for most fixings on the Enfields. It has a torque range of 10 - 50 ft lbs (1.2 - 7.0 m/kg).
|98210||TORQUE WRENCH, BRITOOL, 10 - 50 Ft lbs (1.2 - 7 m/kg)||£165.00|
Striking garage floor mat with Union Jack design. Oil & water resistant durable nylon fibre upper non slip backing. Measures 190cm x 80cm Ideal for use in workshops, home garages and at the track, offers protection when working around the bike and protects ground surface from drips and spills.
|96051||GARAGE MAT, UNION JACK, 190cm x 80cm||£37.40|
IF YOU ARE NEW TO THIS SITE AND WOULD LIKE INSTRUCTIONS ON HOW TO USE AND NAVIGATE IT, PLEASE CLICK HERE.