|
<<< BACK TO PARTS CATEGORIES
Prices DO NOT INCLUDE postage or VAT |
|||
 | 1/2" - 3/8" DRIVE ADAPTOR | |||||||
| A chrome vanadium adaptor which reduces a 1/2" drive ratchet to 3/8". | ||||||||
|
 | ADJUSTABLE SPANNER SET | |||||||
| A set of 3 adjustable spanners in 150mm, 200mm and 250mm lengths, which will open to 20mm, 25mm and 30mm respectively. | ||||||||
|
 | AUTO ADAVANCE LOCKING TOOL | |||||||
| Suitable for the Indian made Bullets this tool fits under the lock screw on the distributor advance mechanism to lock the bob weights in the fully advanced position whilst setting the ignition timing. | ||||||||
|
 | AUTO ADVANCE EXTRACTOR | |||||||
| This is a simple tool, suitable for the Indian built Bullets only, for extracting the auto advance unit in the distributor. | ||||||||
|
 | CAM SPINDLE EXTRACTOR | |||||||
| Suitable for Electra models ONLY. | ||||||||
|
 | CHAINCASE OUTER PULLER | |||||||
| Suitable for Electra models ONLY. | ||||||||
|
 | CYLINDER HEAD NUT TOOL | |||||||
| Suitable for Electra models ONLY. | ||||||||
|
 | DISTRIBUTOR PINION EXTRACTOR | |||||||
| The name says it all. A tool for the Bullet used for removing the Distributor gear. Suitable for Classic models ONLY. |
||||||||
|
 | DRIP TRAY | |||||||
| This steel tray is embossed with the Royal Enfield name. Can be used for an oil change or just a simple drip tray. Its maximum internal dimensions are 350mm x 280mm x 40mm high. | ||||||||
|
 | GEARBOX NUT BOX SPANNER | |||||||||||
| A box spanner suitable for the gearbox sprocket nut on the 4-speed models. Note: NOT suitable for Redditch built models. |
||||||||||||
|
 | GEARBOX PIVOT PIN EXTRACTOR | |||||||
| Suitable for Electra models ONLY. | ||||||||
|
 | GEARBOX PIVOT PIN GUIDE | |||||||
| Suitable for Electra models ONLY. | ||||||||
|
 | IDLER SPINDLE EXTRACTOR | |||||||
| Another tool for Bullets. Designed to aid in removing the idler spindle. Suitable for Classic models ONLY. |
||||||||
|
 | IGNITION FILE | |||||||
| This file is ideal for dressing the ignition points. It also has 2 feeler guages fitted: 0.381mm (0.015") and 0.625mm (0.025"). NOT suitable for Electra models. |
||||||||
|
 | LASER SOCKETS AND RAIL (WHITWORTH, 1/2" DRIVE) | |||||||
| This is a set of 9 (1/2" drive) whitworth sockets in the following sizes 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16 and 5/8w. | ||||||||
|
 | MAGNETO EXTRACTOR | |||||||
| Suitable for Electra models ONLY. | ||||||||
|
 | POINTS SPANNER SET | |||||||
| Small spanner set for magnetos and distributors etc. | ||||||||
|
 | ROCKER SPINDLE EXTRACTOR | |||||||
| Suitable for Electra models ONLY. | ||||||||
|
 | SPARK PLUG HOLE RE-THREADER | |||||||
| Ideal for cleaning and restoring a carbon filled or damaged spark plug thread in your cylinder head. Suitable for BOTH the Classic and Electra models. |
||||||||
|
 | TAPPET CIRCLIP ASSEMBLY TOOL | |||||||
| Suitable for Electra models ONLY. | ||||||||
|
 | TOP DEAD CENTRE TOOL | |||||||
| This tool is the easy way to find top dead centre. Simply screw it in the spark plug hole. | ||||||||
|
 | CAM SPINDLE PULLER | |||||||
| This tool allows the removal of the cam shaft spindles without splitting the crankcases. Suitable for Classic models ONLY. |
||||||||
|
 | FEELER GAUGE | |||||||||||
| Available in imperial and metric sizes. | ||||||||||||
|
 | VALVE LAPPING TOOL | |||||||
| For lapping the valves to the seats once new guides have been fitted. | ||||||||
|
 | VALVE GUIDE REMOVAL AND FITTING TOOL | |||||||
| This makes the fitting and removal of valve guides a simple and easy job. | ||||||||
|
 | TIMING DISC | |||||||
| To help set-up your ignition timing in degrees. | ||||||||
|
 | SPARK PLUG SPANNER | |||||||
| For use with any standard 14mm spark plug. | ||||||||
|
 | RECOIL THREAD REPAIR KITS | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| The simple way to repair damaged threads or create stronger threads in alloy components. Recoils are made from stainless steel diamond shape wire to match the profile of internal thread and external screw thread. The insert is larger in diameter than the tapped hole and compresses during installation and springs back permanently anchored in the tapped hole. Each kit contains: Quality high speed steel (HSS) ground thread intermediate tap, quantity of inserts, installation/tang break tool, easy to follow instructions and a sturdy reusable container. Recommended drill size is given on the label. Extra inserts available in most sizes, please enquire. Note: We can now also supply 2 "kits" which contain a selection of the most commonly used Cycle and Metric sizes. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
 | TAPPET GUIDE EXTRACTOR | |||||||||||
| ST25119 - Suitable for Leanburn models ONLY. ST25109 - Suitable for Classic models ONLY. |
||||||||||||
|
 | CLUTCH CENTRE EXTRACTOR | |||||||
| Suitable for BOTH the Classic and Electra models. | ||||||||
|
 | CLUTCH CENTRE HOLDING TOOL | |||||||
| Suitable for BOTH the Classic and Electra models. | ||||||||
|
 | ENGINE SPROCKET EXTRACTOR | |||||||
| Suitable for BOTH the Classic and Electra models. | ||||||||
|
 | GUDGEON PIN EXTRACTOR | |||||||
| Suitable for Electra and Classic | ||||||||
|
 | OIL PUMP LAPPING TOOL | |||||||
| This lapping tool has been specially designed and manufactured by us to work with both the Feed and Return oil pumps. Suitable for Classic models. |
||||||||
|