|
<<< BACK TO PARTS CATEGORIES
Prices DO NOT INCLUDE postage or VAT |
|||
 | 1/2" - 3/8" DRIVE ADAPTOR | |||||||
| A chrome vanadium adaptor which reduces a 1/2" drive ratchet to 3/8". | ||||||||
|
 | ALTERNATOR CLEARANCE GAUGE | |||||||
| This is a simple laminate device which can be wrapped around the alternator rotor before tightening the outer stator. Once the stator has been fitted it is easily removed. A far easier process than messing around with feelergauges. | ||||||||
|
 | CARBURETTER CLEANING TOOL | |||||||
| A handy little tool for cleaning those difficult to access drillings in your carburetter. | ||||||||
|
 | DIGITAL VERNIER | |||||||
| No home mechanic should be without one of these useful tools. Measures using imperial or metric scales. | ||||||||
|
 | ELECTRICAL TOOL KIT | |||||||
| A comprehensive 399 piece electrical tool kit and carrier for the workshop. Contents include: crimping tool, insulation tape, wire cutters, tester, long nose pliers, roll of primary wire, fuses, test leads, screwdrivers, PVC magnetic twist ties, cable ties and insulated terminals. | ||||||||
|
 | MULTIMETER | |||||||
| This digital multmeter is essential for electrical fault finding. It can perform the following tests: AC and DC volts, DC current, resistance, transistors, diodes and continuity. | ||||||||
|
 | STROBELIGHT | |||||||
| This xenon timing light allows the dynamic ignition timing to be set with up to 60 degrees of advance. It has inductive pick up for ease of connection. Operates on all 12v ignition systems. The xenon bulb (replaceable) provides a brilliant blue/white light and has automotive reverse polarity and overload protection. | ||||||||
|
 | TELESCOPIC MAGNETIC PICK UP TOOL | |||||||
| . | ||||||||
|
 | TELESCOPIC MIRROR | |||||||
| . | ||||||||
|
 | TOOL POUCH | |||||||
| A quality black leather tool pouch embossed with "Royal Enfield". Ideal for the inside of your Bullet (or any other Enfield) tool box. Tools not included. |
||||||||
|
 | TOOL POUCH. | |||||||
| This tool "roll" is made from a thick hide. It is approximately 3'' wide, 6" tall, 10'' long and is held on by 2 straps. It can be fitted to the rear grab rail or mudguard carriers (it can not be fitted to the front forks as it will restrict their movement). Available in black, embossed with "Royal Enfield" in gold and it can be fitted on any model (tools not included). | ||||||||
|
 | TOOL ROLL | |||||||||||
| This tool roll is made from a thick hide. It is approximately 4.5'' diameter by 10'' long and is held on by 2 straps. It is designed to strap on to the fork legs, but can be fixed anywhere. Available in black or brown, embossed with "Royal Enfield" in gold and it can be fitted on any model (tools not included). | ||||||||||||
|
 | TYRE PEN | |||||||
| A white pen for painting the wording on the side of tyres. | ||||||||
|
 | WIRE BRUSHES (SET OF 3) | |||||||
| . | ||||||||
|
 | TIEDOWN STRAPS | |||||||
| We can offer 2 styles of tiedown straps, either the standard ratchet strap type or the pull down and auto-lock version. | ||||||||
|
 | COLORTUNE | |||||||
| The world renowned carburetter mixture setting device. Ideal fo motorcycles to help setup the correct air/fuel mixture for optimal running. | ||||||||
|
 | COMPRESSION TESTER | |||||||
| A compression tester suitable for all Royal Enfields. | ||||||||
|
 | LASER SPANNER SET (WHITWORTH) | |||||||
| This is a set of 6 open ended whitworth spanners in the following sizes: 1/8 x 3/16, 3/16 x 1/4, 1/4 x 5/16, 5/16 x 3/8, 3/8 x 7/16, 7/16 x 1/2. | ||||||||
|
 | COMBINATION SPANNER SET (WHITWORTH) | |||||||
| This is a set of 8 ring/open ended whitworth spanners in the following sizes: 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2 and 9/16w. | ||||||||
|
 | LASER COMBINATION SPANNER SET (METRIC) | |||||||
| This is a set of 6 ring/open ended metric spanners in the following sizes: 8, 10, 12, 13, 14, 17mm. | ||||||||
|
 | LASER RING SPANNER SET (METRIC ) | |||||||
| This is a set of 8 metric ring spanners in the following sizes: 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19 and 20 x 22mm. | ||||||||
|
 | LASER GASKET SCRAPER | |||||||
| The correct tool for scraping old gaskets off cylinder heads and crankcases etc. The wide steel blade helps prevent damage. | ||||||||
|
 | LASER SOCKETS AND RAIL (WHITWORTH, 1/2" DRIVE) | |||||||
| This is a set of 9 (1/2" drive) whitworth sockets in the following sizes 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16 and 5/8w. | ||||||||
|
 | LASER SOCKETS AND RAIL (WHITWORTH, 3/8" DRIVE) | |||||||
| This is a set of 7 (3/8" drive) whitworth sockets in the following sizes: 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2w. | ||||||||
|
 | LASER SOCKETS AND RAIL (METRIC, 3/8" DRIVE) | |||||||
| This is a set of 8 (3/8" drive) metric sockets in the following sizes: 9, 10, 11, 12, 13, 14, 15, 17, 19mm. | ||||||||
|
 | LASER SOCKET SET RATCHET (3/8" DRIVE) | |||||||
| This is a chrome vanadium 3/8" drive ratchet with quick release mechanism. | ||||||||
|
 | LASER HEX KEY SET | |||||||||||
| A set of 10 hex Allen keys available in both metric and imperial sizes. | ||||||||||||
|
 | LASER HSS DRILL BIT SET (METRIC) | |||||||
| A set of 19 metric High Speed Steel drill bits ranging in size from 1mm to 10mm in 0.5mm increments. | ||||||||
|
 | LASER SCREW DRIVER SET | |||||||
| A 7 piece screwdriver set including: flat, Phillips and Pozidrive heads in a variety of sizes. They have soft grip handles and chrome vanadium shatfts. | ||||||||
|
 | BRITOOL SOCKET SET (METRIC) | |||||||
| This is a 7 (3/8" drive) piece bi-hexagon metric socket set on a rail. Sizes include: 10, 11, 12, 13, 14, 17, and 19mm. Note: The Whitworth version of this set is no longer available. |
||||||||
|
 | BRITOOL SOCKET SET RATCHET (3/8" DRIVE) | |||||||
| This is a 3/8" drive ratchet with a polypropylene handle. It uses a high quality 72 tooth twin pawl ratchet mechanism. | ||||||||
|
 | BRITOOL HEX KEY SETS | |||||||||||
| A set of 9 hex Allen keys available in both metric and imperial sizes. | ||||||||||||
|
 | BRITOOL SCREWDRIVER SET | |||||||
| A 7 piece screwdriver set including flat and Pozidrive heads in a variety of sizes. | ||||||||
|
 | BRITOOL TORQUE WRENCH (3/8" DRIVE) | |||||||
| This torque wrench has a 3/8" drive and with its low torque values is ideal for most fixings on the Enfields. It has a torque range of 10 - 50 ft lbs (1.2 - 7.0 m/kg). | ||||||||
|
 | BRITOOL OPEN JAW SPANNER SET (METRIC) | |||||||
| This is a set of 7 open ended metric spanners in the following sizes: 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19mm. | ||||||||
|
 | BRITOOL OPEN JAW SPANNER SET (WHITWORTH) | |||||||
| This Whitworth open spanner set has 7 pieces with the following sizes. 1/8 x 3/16, 3/16 x 1/4, 1/4 x 5/16, 5/16 x 3/8, 3/8 x 7/16, 7/16 x 1/2, 1/2 x 9/16w. | ||||||||
|
 | BRITOOL COMBINATION SPANNER SET (METRIC) | |||||||
| This is a set of 7 ring/open ended metric spanners in the following sizes: 8, 10, 12, 13, 14, 17 and 19mm. | ||||||||
|
|
| BRITOOL COMBINATION SPANNER SET (WHITWORTH) | |||||||
| This is a Whitworth 7 piece combination spanner set, open at one end and ring at the other. Sizes included 1/8, 3/16, 1/4, 5/16, 3/8, 7/16 and 1/2w. | ||||||||
|
 | BRITOOL RING SPANNER SET (METRIC) | |||||||
| This is a set of 7 metric ring spanners in the following sizes: 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19mm. | ||||||||
|
|
| BRITOOL RING SPANNER SET (WHITWORTH) | |||||||
| This Whitworth ring set is made up of 5 pieces in the following sizes. 1/8 x 3/16, 1/4 x 5/16, 3/8 x 7/16, 1/2 x 9/16, 11/16 x 3/4w. | ||||||||
|