1966 Continental GT
Page 1 - Engine and Cylinder Head
Page 2
Piston, Connecting Rod & Crankshaft
Move your cursor over the different parts in the exploded diagram for more information
1
CYLINDER HEAD, (1.1/8")
46907A
Click illustration number for more information
2
There are 2 products in this position
Click illustration number for more information
3
VALVE, EXHAUST (FOR ALLOY HEAD)
44766
Click illustration number for more information
4
VALVE, INLET (FOR ALLOY HEAD)
44765
Click illustration number for more information
5
There are 6 products in this position
Click illustration number for more information
6
VALVE SPRING SET, 4 SPRINGS
VS538
Click illustration number for more information
8
VALVE SPRING ALLOY COLLAR, TOP
42651
Click illustration number for more information
9
VALVE SPRING COLLAR, BOTTOM
42652
Click illustration number for more information
10
VALVE SPLIT COLLAR (1 NEEDED PER VALVE)
42492
Click illustration number for more information
11
There are 2 products in this position
Click illustration number for more information
12
ROCKER HOUSING
45233
Click illustration number for more information
13
There are 3 products in this position
Click illustration number for more information
14
ROCKER SPINDLE
45351
Click illustration number for more information
15
ROCKER ARM (PUSH ROD END)
45349
Click illustration number for more information
16
ROCKER ARM (VALVE END)
45350
Click illustration number for more information
17
ROCKER SPINDLE SPRING WASHER
45249
Click illustration number for more information
18
ROCKER SPINDLE NUT, 7/16 X 26TPI
3570
Click illustration number for more information
19
ROCKER SPINDLE WASHER
4501
Click illustration number for more information
20
ROCKER COVER
45800
Click illustration number for more information
21
ROCKER COVER GASKET
38872
Click illustration number for more information
22
ROCKER COVER CENTRE STUD
45648
Click illustration number for more information
23
ROCKER COVER STUD SHOULDERED NUT
45801
Click illustration number for more information
24
ROCKER COVER STUD WASHER
1846
Click illustration number for more information
25
CARBURETTOR STUD
35470
Click illustration number for more information
26
There are 2 products in this position
Click illustration number for more information
27
PUSH ROD TUNNEL ALLEN SCREW
44026
Click illustration number for more information
29
CYLINDER HEAD STUD, LONG 6.5/8"
39346
Click illustration number for more information
30
CYLINDER HEAD STUD NUT, SHOULDERED
33036
Click illustration number for more information
31
WASHER, CYLINDER HEAD, REDUCED OD
5975
Click illustration number for more information
32
CYLINDER HEAD STUD, SHORT, 5.1/4"
39345
Click illustration number for more information
33
CYLINDER HEAD STUD NUT, 5/16 BSF
27621
Click illustration number for more information
34
WASHER, FLAT 5/16"
8634
Click illustration number for more information
35
CYLINDER BARREL with provision for two pushrod screws
45275
Click illustration number for more information
36
CYLINDER BASE GASKET
39037
Click illustration number for more information
37
ROCKER COVER STUD LOCK NUT
F192
Click illustration number for more information
50
There are 2 products in this position
Click illustration number for more information
IF YOU ARE NEW TO THIS SITE AND WOULD LIKE INSTRUCTIONS ON HOW TO USE AND NAVIGATE IT, PLEASE CLICK HERE.
