1947 RE125 (Flying Flea)
Page 2 - Crankcase Studs & Bolts , Decompressor, Engine Sprocket & Exhaust System
Page 3
Gear Unit
Page 1
Cylinder, Piston, Crankshaft & Crankcases
Move your cursor over the different parts in the exploded diagram for more information
1
STUD, 5/16'' X 1.5/16'' X 26tpi (36304).
41713
Click illustration number for more information
2
NUT, 5/16 X 26tpi THICK
8633
Click illustration number for more information
3
STUD, 1/4'' x 1.1/4'' x 26TPI
14114
Click illustration number for more information
4
NUT, 1/4'' X 26tpi
27000
Click illustration number for more information
5
WASHER, 1/4'' (Small OD)
5915
Click illustration number for more information
6
STUD, 1/4'' X 1.11/16'' X 26TPI
34174
Click illustration number for more information
7
STUD, 1/4'' x 2.3/4'' x 26TPI
14234
Click illustration number for more information
8
There are 2 products in this position
Click illustration number for more information
9
WASHER, 1/4'' (Small OD)
5915
Click illustration number for more information
10
DECOMPRESSOR BODY
27021
Click illustration number for more information
11
DECOMPRESSOR SEAL SMALL
14750
Click illustration number for more information
12
DECOMPRESSOR VALVE
27022
Click illustration number for more information
13
DECOMPRESSOR SPRING
27024
Click illustration number for more information
14
DECOMPRESSOR CAP
27025
Click illustration number for more information
15
CAP PEG, can use 110320
27998
Click illustration number for more information
16
ENGINE SPROCKET
27002
Click illustration number for more information
17
KEY (CLUTCH OR ENGINE SPROCKET)
BS30
Click illustration number for more information
18
NUT, THIN, 7/16 X 26TPI
7732
Click illustration number for more information
19
WASHER, FLAT 7/16''
18139
Click illustration number for more information
20
EXHAUST PIPE (NO BULGE) NUT TYPE
26983
Click illustration number for more information
21
EXHAUST PIPE NUT
26434
Click illustration number for more information
22
SEAL, EXHAUST PIPE-CYLINDER
26468
Click illustration number for more information
23
SILENCER
29680
Click illustration number for more information
24
SILENCER CLIP (1.3/8'')
29749
Click illustration number for more information
25
STUD, 1/4'' X 1.13/16'' X BSF (SPECIAL)
29805
Click illustration number for more information
26
NUT, 1/4'' X 26tpi
26998
Click illustration number for more information
27
WASHER, SHAKEPROOF, 1/4''
27916
Click illustration number for more information
28
There are 3 products in this position
Click illustration number for more information
IF YOU ARE NEW TO THIS SITE AND WOULD LIKE INSTRUCTIONS ON HOW TO USE AND NAVIGATE IT, PLEASE CLICK HERE.
