Product code: 500632
Normal Qty Required: 5

Hex Socket Screw, M5 X 20mm, E/START + LEANBURN (EACH)

Product code: 145959
Normal Qty Required: 1

DRIVE COVER (Electric Start)

Product code: 550094
Normal Qty Required: 1

DOWEL, 5mm ( KS + ES, 500cc + SIXTY5 ) 5 SPEED

Product code: 560015
Normal Qty Required: 1

BUSH (PB CASTING) 500+535cc, E-START ONLY

Product code: 560005
Normal Qty Required: 1

GASKET, DRIVE COVER, ELECTRIC START MODELS 0.5mm **Standard Thickness**

Product code: 560014
Normal Qty Required: 1

IDLER GEAR, 500+535cc, E-START ONLY

Product code: 560016
Normal Qty Required: 1

NEEDLE BEARING, 500+535cc, E-START ONLY

Product code: 560017
Normal Qty Required: 1

GEAR, CLUTCH DRIVEN, 500+535cc, E-START ONLY

Product code: 560011
Normal Qty Required: 1

SPRAG CLUTCH, 500+535cc, E-START ONLY.
Sprag Clutch failure is a common problem normally caused by back firing. You should consider rectifying the cause and also the fitting of our ELECTRIC STARTER UPGRADE KIT, part 90158

Product code: 560010
Normal Qty Required: 1

CIRCLIP, 500+535cc, E-START ONLY

Product code: 560008
Normal Qty Required: 1

CLUTCH DRIVING GEAR, 500+535cc, E-START ONLY

Product code: 560009
Normal Qty Required: 1

SPINDLE, 500+535, E-START ONLY

Product code: 560018
Normal Qty Required: 1

CRANKSHAFT SPROCKET/GEAR UPTO 03/04, after 03/04 use 560018C

Product code: 560042
Normal Qty Required: 1

SPRAG CLUTCH ASSEMBLY, 500+535cc (147873) Sprag clutch failure is a common problem normally caused by back firing. If back firing has caused your original sprag clutch to fail you must rectify the cause of this before fitting the new unit. If a new unit is damaged because of back firing, it will not be covered under warranty.