1959 Crusader Sports
Page 1 - Engine and Cylinder Head (Early type)
Next Page >
Engine and Cylinder Head (Later type)
Move your cursor over the different parts in the exploded diagram for more information
A
HI-TEC ALLOY/STEEL ROCKER SET, (Inlet and Exhaust) SUPPLIED COMPLETE WITH O RINGS
ROCKERSET
Click illustration number for more information
1
There are 2 products in this position
Click illustration number for more information
2
There are 3 products in this position
Click illustration number for more information
3
EXHAUST VALVE
35392
Click illustration number for more information
4
INLET VALVE
39156
Click illustration number for more information
5
There are 6 products in this position
Click illustration number for more information
7
V/SPRING (39659/60) 4 SPRINGS
VS494
Click illustration number for more information
8
VALVE SPRING COLLAR (TOP)
35238
Click illustration number for more information
9
VALVE SPRING COLLAR (BOTTOM)
33508
Click illustration number for more information
10
VALVE SPLIT COLLAR (1 NEEDED PER VALVE) Early type
11099
Click illustration number for more information
11
VALVE STEM CAP
10672
Click illustration number for more information
12
HI-TEC ALLOY/STEEL ROCKER SET
ROCKERSET
Click illustration number for more information
16
ROCKER BEARING PLATE
38874
Click illustration number for more information
17
ROCKER BEARING STUD
16982
Click illustration number for more information
18
ROCKER BEARING NUT, SMALL HEX
27305
Click illustration number for more information
19
WASHER, ROCKER + MANIFOLD
9908
Click illustration number for more information
20
ROCKER COVER
38871
Click illustration number for more information
21
GASKET,ROCKER COVER.
38872
Click illustration number for more information
22
ROCKER COVER STUD (EARLY)
42854
Click illustration number for more information
23
ROCKER COVER NUT (EARLY)
24054
Click illustration number for more information
24
ROCKER STUD WASHER
1846
Click illustration number for more information
25
CARB STUD
35470
Click illustration number for more information
26
NUT, SHOULDERED 5/16 X 26tpi
27001
Click illustration number for more information
27
WASHER
14611
Click illustration number for more information
28
CARB SPACER WASHER, 24mm
AM/46191/24
Click illustration number for more information
29
CYL. HEAD STUD, LONG, 6.5/8
39346
Click illustration number for more information
30
CRUSADER HEAD STUD NUT
33036
Click illustration number for more information
31
WASHER, CYLINDER HEAD, REDUCED OD
5975
Click illustration number for more information
32
CYLINDER HEAD STUD, SHORT, 5.1/4
39345
Click illustration number for more information
33
STUD NUT, 5/16 BSF (DEEP)
27621
Click illustration number for more information
34
WASHER, FLAT 5/16
8634
Click illustration number for more information
35
CYLINDER BARREL, SINGLE SCREW TYPE
38865A
Click illustration number for more information
36
There are 2 products in this position
Click illustration number for more information
.jpg)
