1959 Clipper
Page 2 - Piston, Connecting Rod And Crankshaft
Next Page >
Crankcase
< Previous Page
Engine And Cylinder Head
Move your cursor over the different parts in the exploded diagram for more information
1
There are 9 products in this position
Click illustration number for more information
3
There are 6 products in this position
Click illustration number for more information
5
GUDGEON PIN (350)
110090
Click illustration number for more information
6
CIRCLIP, PISTON (38771)
20363
Click illustration number for more information
7
CON ROD WITH LATER TYPE CAP SCREWS (Order shells separately)
39358B
Click illustration number for more information
8
There are 2 products in this position
Click illustration number for more information
9
FOR USE WITH EARLY CONROD
CON ROD BOLT LOCATING PIN
35131
Click illustration number for more information
10
FOR USE WITH EARLY CONROD
CONROD BOLT NUT (EARLY)
35130
Click illustration number for more information
11
CONNCTING ROD B.E. BOLT WASHER
42443
Click illustration number for more information
12
FOR USE WITH EARLY CONROD
SPLIT PIN
30779
Click illustration number for more information
13
There are 6 products in this position
Click illustration number for more information
14
CRANKSHAFT, ** USED ** NEEDS REGRIND
44770
Click illustration number for more information
16
CRANKSHAFT OIL PASSAGE PLUG
44649
Click illustration number for more information
17
CRANKSHAFT OIL FEED STUD
41831A
Click illustration number for more information
19
STUD, 3/8" x 1.5/16" BSF, ROTOR
42359
Click illustration number for more information
20
PUSHROD (FOR CAST IRON HEAD)
39164
Click illustration number for more information
21
PUSHROD (FOR CAST IRON HEAD).
39165
Click illustration number for more information
24
ADJUSTING SCREW, PUSHROD (250cc)
39160
Click illustration number for more information
25
NUT, 1/4'' X 26tpi
27620
Click illustration number for more information
26
CRANKSHAFT DISTANCE PIECE
39035
Click illustration number for more information
27
CRANKSHAFT SLEEVE
41816
Click illustration number for more information
28
SPROCKET, ENGINE (23 TEETH)
39036
Click illustration number for more information
29
ENGINE SPROCKET WASHER/SPACER
36852
Click illustration number for more information
30
TIMING SPROCKET (14T)
36853
Click illustration number for more information
31
WASHER, 7/16''
5025
Click illustration number for more information
32
NUT, 7/16" BSF, TIMING SPROCKET/HEAD STEADY
DE390
Click illustration number for more information
33
BUSH, SMALL END FOR ALLOY ROD (NOT FITTED AS STANDARD)
36017
Click illustration number for more information
