Product code: 40730
Normal Qty Required: 1
CRANKCASES, 250 CLIPPER/HOUNDS ARROW, CONDITION 10/10 - THESE ARE NEW OLD STOCK UNSTAMPED CRANKCASES IN EXCELLENT FACTORY CONDITION. INCLUDES TIMING SPINDLES, CAM FOLLOWERS AND MAIN BEARING HOUSING.
** BOTH HALVES **
Product code: 24173
Normal Qty Required: 2
OIL PLUG WITH FILTER
** CONSISTS OF ITEMS: 12 AND 15 **
Product code: 23584
Normal Qty Required: 1
MAGNETO STRAP STUD, (CRANKCASE)
Product code: 402ENF
Normal Qty Required: 1
GASKET SET, 250cc CLIPPER PRE UNIT 1954-57, 250cc FIRE ARROW 1955-57, 250cc HOUNDS ARROW 1955-57
Product code: SEALSET26
Normal Qty Required: 1
SEAL SET, 9 SEALS, 250cc CLIPPER PRE UNIT 1954-57, 250cc FIRE ARROW 1955-57, 250cc HOUNDS ARROW 1955-57
Product code: 16291
Normal Qty Required: 1
TIMING SIDE BUSH
Product code: 32435
Normal Qty Required: 1
RACE, TIMING SIDE ROLLER
Product code: 23697
Normal Qty Required: 1
RACE, DRIVE SIDE ROLLER
Product code: 24568
Normal Qty Required: 1
DRIVESIDE DISTANCE PIECE
Product code: SE342
Normal Qty Required: 36
BEARING, ROLLER, .2498'' X .327'' - (Please note this is the most common size fitted. However, as the bearing should be selectively assembled we do have under-sizes available as well)
** MOST COMMON SIZE **
Product code: SE342A
Normal Qty Required: 36
BEARING, ROLLER, .2492'' X .327''
** ALTERNATIVE SIZE **
Product code: SE342B
Normal Qty Required: 36
BEARING, ROLLER, .2490'' X .327''
** ALTERNATIVE SIZE **
Product code: 32872
Normal Qty Required: 2
WASHER, ROLLER RACE END
This fits on the timing side between the crankcase and bearing race
Product code: 24795
Normal Qty Required: 4
STUD, 5/16" x 1.15/16" x 26tpi, (CRANKCASE CYLINDER LONG (24796) & SADDLE SPRING)
** ONE HIDDEN BEHIND FILLER, COLLAR ADAPTOR **
Product code: 20777
Normal Qty Required: 1
STUD, 5/16" x 1.9/32" x 26tpi, CRANKCASE CYLINDER, SHORT or DUAL SEAT
Product code: 24178
Normal Qty Required: 2
DRAIN PLUG WASHER
Product code: 13919
Normal Qty Required: 1
CRANKCASE FILTER STUD, 3/8" x 2.3/4" x 26tpi (SPECIAL)
Product code: 19670
Normal Qty Required: 1
CAP, OIL FILLER WITH DIPSTICK (Early Bullets, Twins and G etc)
Product code: 18275
Normal Qty Required: 1
COLLAR, OIL FILLER CAP
Product code: 39740
Normal Qty Required: 1
CRANKCASE OIL FILLER COLLAR ADAPTOR/EXTENSION
Product code: 22198
Normal Qty Required: 1
NON RETURN VALVE PLUG
Product code: 39974
Normal Qty Required: 1
SPRING, OIL RELEASE
Product code: G76
Normal Qty Required: 1
BALL BEARING, 3/16'' (32017)
Product code: 26649C
Normal Qty Required: 1
BREATHER BODY AND PIPE
Product code: 39880
Normal Qty Required: 1
BREATHER BACK PLATE
Product code: 29357
Normal Qty Required: 1
BREATHER PIPE CLIP
Product code: 26648
Normal Qty Required: 2
SCREW, BREATHER BODY, LONG
Product code: 26664
Normal Qty Required: 1
SCREW, BREATHER BODY AND GEARBOX
Product code: 39879
Normal Qty Required: 2
BREATHER DISC VALVE (26651), SOLD INDIVIDUALLY
Product code: 15267
Normal Qty Required: 1
STUD, 5/16" x 2 5/8" x 26tpi, HEAD STEADY/CRANKCASE
Product code: 13413
Normal Qty Required: 1
STUD, 5/16" x 3.7/16" x 26tpi
Product code: 17476
Normal Qty Required: 3
STUD, 5/16" x 5.5/8" x 26tpi
Product code: 8633
Normal Qty Required: 6
NUT, 5/16 X 26tpi, THICK (EACH)
** NOTE : ALTHOUGH THE ILLUSTRATIONS OF THE 2 NUTS ARE DIFFERENT THEY ARE ACTUALLY THE SAME **
Product code: 8634
Normal Qty Required: 6
WASHER, FLAT 5/16'' (EACH)
Product code: 23516
Normal Qty Required: 3
STUD, 1/4" x 5" x 26tpi
Product code: 22681
Normal Qty Required: 2
STUD, 1/4" x 5.1/2" x 26tpi
Product code: 26998
Normal Qty Required: 14
NUT, 1/4'' X 26tpi (EACH)
Product code: 82
Normal Qty Required: 14
WASHER, FLAT, 1/4''
Product code: 22614
Normal Qty Required: 1
TAPPET GUIDE, INLET
Product code: 22615
Normal Qty Required: 1
TAPPET GUIDE, EXHAUST
Shop for accessories at Hitchcocks Motorcycles