Product code: 36862
Normal Qty Required: 1
CYLINDER BARREL, 250 CLIPPER (1954-57 PRE UNIT) & MODEL S (1951-54), **USED**, CONDITION 7/10 - MAY HAVE 1 OR 2 BROKEN FINS, WILL REQUIRE REBORING
Product code: 24494
Normal Qty Required: 1
CYLINDER BASE GASKET
Product code: 7216
Normal Qty Required: 5
NUT, SHOULDERED, 5/16'' X 26TPI
Product code: 25861
Normal Qty Required: 2
PUSHROD TUNNEL SEAL, SOLD INDIVIDUALLY, new style Viton
Product code: 32441
Normal Qty Required: 1
TAPPET COVER, PLAIN ALLOY TYPE, POLISHED, (PRE-2007) 350 & 500 BULLETS
Product code: 21869
Normal Qty Required: 1
TAPPET COVER GASKET
Product code: 23839
Normal Qty Required: 1
TAPPET COVER, STUD, 5/16" x 2.1/4" x 26TPI
Product code: 17385
Normal Qty Required: 1
TAPPET COVER WING NUT (pre 1999)
Product code: 8634
Normal Qty Required: 1
WASHER, FLAT 5/16'' (EACH)
Product code: 25990
Normal Qty Required: 1
TAPPET COVER FIBRE WASHER
Product code: 38839
Normal Qty Required: 1
CYLINDER HEAD, **USED** 250 CLIPPER 1954-1958, no broken fins, Condition 7/10
Product code: 21555
Normal Qty Required: 1
CYLINDER HEAD GASKET
Product code: 26198
Normal Qty Required: 2
FERRULE, CYLINDER HEAD, New old stock
Product code: 23518
Normal Qty Required: 4
STUD, 5/16" x 1.11/16" x 26tpi, CYLINDER HEAD
Product code: 23842
Normal Qty Required: 4
NUT, CYLINDER HEAD STUD, 5/16'' x 26 extended
Product code: 3252
Normal Qty Required: 4
WASHER, 5/16'' REDUCED DIAMETER
Product code: 25098
Normal Qty Required: 1
ROCKER COVER (For Model J & J2 use 22601)
Product code: 21664
Normal Qty Required: 1
ROCKER COVER GASKET (For Model J & J2 use 22627)
Product code: 21468
Normal Qty Required: 1
ROCKER COVER STUD (5/16" x 26TPi x 2.7/8")
Product code: 24054
Normal Qty Required: 1
NUT, ROCKER COVER, 5/16'' x 26tpi shouldered
Product code: 1846
Normal Qty Required: 1
WASHER, ROCKER STUD
Product code: 21322
Normal Qty Required: 2
VALVE GUIDE, 0.623-0.624" (Standard size) Iron LONG
Product code: 36379
Normal Qty Required: 1
ROCKER BEARING, can use ROCKERSETA
** SEE ITEM BELOW **
Product code: ROCKERSETA
Normal Qty Required: 1
HI-TEC ALLOY/STEEL ROCKER SET for Model G and CO, 250 Clipper (1954 to 1957) etc.
** INCLUDES BEARINGS, CAPS AND ROCKERS etc. **
Product code: 10772
Normal Qty Required: 8
STUD, 1/4" x 1.7/8" x 26tpi, ROCKER
Product code: 27305
Normal Qty Required: 8
ROCKER BEARING NUT, SMALL HEX
Product code: 9908
Normal Qty Required: 8
WASHER, ROCKER + MANIFOLD
Product code: 37366
Normal Qty Required: 1
ROCKER OIL FEED PIPE (250 Clipper)
** OIL FEED ASSEMBLY COMPLETE **
Product code: 29065
Normal Qty Required: 2
OIL PIPE UNION (CRANKCASE)
Product code: 29066
Normal Qty Required: 2
OIL PIPE UNION NUT
Product code: 29079
Normal Qty Required: 2
OIL PIPE NIPPLE
Product code: 35470
Normal Qty Required: 2
STUD, 5/16" x 1.3/16" x 26tpi, CARBURETTER
Product code: 27001
Normal Qty Required: 2
NUT, SHOULDERED 5/16 X 26tpi (EACH)
Product code: 21790
Normal Qty Required: 2
CARBURETTOR FLANGE GASKET
Shop for accessories at Hitchcocks Motorcycles