Product code: A11329
Normal Qty Required: 1
CLUTCH SPROCKET AND DRUM
Product code: 90056
Normal Qty Required: 1
CLUTCH ASSEMBLY COMPLETE, WITH IMPROVED SPLINED OUTER BASKET AND FRICTION PLATES, 4 SPEED
Product code: BELTDRIVEA
Normal Qty Required: 1
BELT DRIVE KIT, 736 INTERCEPTOR SII + 736 INTERCEPTOR SIA
Primary belt drive and Clutch complete. This a modern clutch which will bolt straight on. It has been race proven and is as good for road use as well as the track. Better than anything Enfields ever produced.
Product code: A10847
Normal Qty Required: 4
CLUTCH PLATE, SPLINED TYPE
Product code: 144460
Normal Qty Required: 4
CLUTCH PLATE, PLAIN STEEL
Product code: TR91
Normal Qty Required: 1
PRESSURE PLATE WITH ADJUSTERS
PRESSURE PLATE
Product code: TR92
Normal Qty Required: 3
ADJUSTER, CLUTCH PRESSURE PLATE
CLUTCH PRESSURE PLATE ADJUSTER
Product code: TR93
Normal Qty Required: 3
NUT, CLUTCH ADJUSTER SCREW
CLUTCH ADJUSTER SCREW NUT
Product code: VR73/6
Normal Qty Required: 1
THRUST WASHER, SPLINED
THRUST WASHER, SPLINED
Product code: VR68/6
Normal Qty Required: 1
CLUTCH CENTRE DRUM AND BACKPLATE. This uses the short distance tubes and is for the plain bearing style clutch basket)
CLUTCH CENTRE DRUM AND BACKPLATE
Product code: VR72/1
Normal Qty Required: 13
SPACER, CLUTCH PRESSURE PLATE, 3/4'' long
DISTANCE TUBE (CLUTCH)
Product code: G69/6
Normal Qty Required: 1
CLUTCH CENTRE
CLUTCH CENTRE
Product code: G70/5
Normal Qty Required: 3
CUSH RUBBER, CLUTCH (LARGE) 4 plate clutch (1.20" long), (EACH)
CLUTCH CUSH RUBBER (LARGE)
Product code: G70A/5
Normal Qty Required: 3
CUSH RUBBER, CLUTCH (SMALL) 4 plate clutch (1.20" long) , (EACH)
CLUTCH CUSH RUBBER (SMALL)
Product code: G71
Normal Qty Required: 1
CLUTCH RETAINING PLATE
CLUTCH RETAINING PLATE
Product code: 29818
Normal Qty Required: 3
CLUTCH SPRING (light).(144138).
CLUTCH SPRING (light).(144138).
Product code: ST181
Normal Qty Required: 3
CLUTCH SPRING
CLUTCH SPRING
Product code: G80
Normal Qty Required: 3
CLUTCH SPRING SCREW, 1/4'' BSF
CLUTCH SPRING SCREW
Product code: TR77
Normal Qty Required: 1
CLUTCH FRONT PLATE (can use TR77A + extend rod by 1/4")
CLUTCH FRONT PLATE
Product code: TR77A
Normal Qty Required: 1
CLUTCH FRONT PLATE with spring grooves
CLUTCH FRONT PLATE, this part can replace the standard front plate (TR77), but will require a slightly longer clutch pushrod.
Product code: G2/41/1
Normal Qty Required: 1
CLUTCH LEVER
CLUTCH LEVER
Product code: G2/13
Normal Qty Required: 2
PIN, CLUTCH LEVER CAP
PIN
Product code: H44/1
Normal Qty Required: 1
CLUTCH ADJUSTER WITH BALL and NUT
CLUTCH ADJUSTER NUT AND BALL
Product code: H66/1008
Normal Qty Required: 1
CLUTCH ROD, 10.1/2"
CLUTCH ROD
Product code: H66B
Normal Qty Required: 1
CLUTCH PAD
CLUTCH PAD
Shop for accessories at Hitchcocks Motorcycles